Author Archives: Kinsey Plumbing

How Can I Find a Water Leak in My House?

Rusted Burst Pipe With Water Spraying

Benefit From Water Leak Detection Services

A water leak can be a confusing phenomenon that may occur at anytime and any place around your property. It’s important to pay attention to the signs of a leak as oftentimes tracing a leak may prove difficult without the help of a professional as leaks can travel away from their source. With a professional you’ll have access to leak detection technology that is advanced enough to track a leak without tearing into drywall or digging into the ground. With professional water leak detection services you can expect your pipelines to be fixed with localized  efficiency and care. If you have any questions regarding a leak contact your local plumbing services today!

What is a leak detection system?

A water leak detection system uses technology to assist in tracking down a leak with such methods that can include laser or infrared technology, pressure sensors, video camera inspection, hydrostatic testing or acoustic testing.

How does water leak detection work?

Water leak detection services with technology can differ depending on the type of of tool being used. With an acoustic leak detection device you’ll see leaks located by differentiating sounds away from normal water flow along the pipe distribution system. Small leaks tend to have a higher frequency sound whilst large leaks tend to produce a lower frequency.

How does a water leak detector work?

A water leak detector will incorporate a device that will allow the operator to trace a leak through audio, visual, or other sensory abilities. Each device incoporates a technoligical aspect that meaures or senses particular phenomena to known abnormal results from previous development. Water leak detection and repair can range depending on the device that your particular plumber uses.

How do plumbers detect slab leaks?

Slab leaks can be detected through access zones of a piping system through video pipe cameras that have waterproof protection. It attatches to a flexible cable that will be able to snake through the interior of plumbing line with it’s view being broadcasted on a moniter that the plumber can reference. Once a break or crack is seen the camaera can send a signal to inform the plumber of the exact loation of the pipe’s damage. Another way a slab leak can be detected is with a pressure sensor which can scan for changes in temperature in the pressure of the foundation which will then locate the spot where water is escaping from the piping line. With acoustic discos or microphones plumbers are able to track leaks by hearing sound through the layers of concrete in the foundation. Water that’s escaping through pipes will emit a unique sound that the micriphone and dics will capture which will assist in tracking the locaiton of the pipe leak.

How much is a leak detection service?

Water leak detection services can range in costs anywhere from $75 to more than $350. This will be determined by the type of equipement that’s being used, the location of the leak and the type of water leak.

How can I tell if I have a foundation leak?

A foundation leak can occur from sewer pipes or water pipes yet can exhibit similar symtoms that every property owner should be aware of. Something to keep out for are any cracks or breaks in the foundation. Oftentimes, pipes are connected to the home, so when the foundation shifts than pressures can be exhibited on the piping as well as the cement which can cause craks or breaks to form on them both. When the sewer line is the culprit of the foundation or slab leak, patches of grass above may be aprticularly green or lush. If you see any localized growth than the sewage will act as fertilizer and point to a leak from below. Another sign of an underground water leak could be with pools of water around the surface of the ground.

Water Pipe Break Under Landscape with Water Leaking

How To Tell If You Have a Water Leak

  • Increased Water Bills
  • Lush Patches of Grass
  • Breaks in Foundation
  • Water Stains on Floor/Walls
  • Growth of Mold/Mildew
  • Musty Smells
  • Drop in Water Pressure
  • Pools of Water Around Landscape

Contact A Professional For Water Leak Detection Services

When you need assistance with slab leaks or pipe leaks than rely on a qualified water leak detection company for your water leak detection services. With other water leak detection for home cases consider other sources of entry like from the ceiling or roof of your property. Some leaks may spring up after a particularly severe storm or through debris, hail or tree impacts of your roofing system. In such cases consider roof restoration services for assistance. If you need help determining what kind of leak your home or business is experiencing contact your local water leak detection service today!

When you need help with water leak detection services in Jarrell and Georgetown, TX call (512) 930-2677 with Kinsey Plumbing Services!

How Do You Stop Plumbing Problems?

Regular plumbing maintenance checks should be performed at least twice yearly.

How often should you check your plumbing?

When it comes to taking care of your home, regular maintenance is important to make sure everything is in good shape and serving your home and family efficiently for years. Among the important systems in your home that you should have a regular maintenance plan for is plumbing.

For the most part, you should check your plumbing system at least every two years. If you live in an older home or on property with large trees, you may want to have your system checked more often. Homes built before the1960s may have steel pipes that are deteriorating and need repair or replacement to avoid leaks. The root systems of large trees can cause damage to your plumbing without you ever knowing, so it’s good to have a plumber check regularly for any damages.

It’s also advisable to get the plumbing checked before you move into a new home in case your home inspector has missed any problems.

Kinsey Plumbing Services offers two different maintenance plans for plumbing in Jarrell and Georgetown, TX that gives you an opportunity for up to three visits per year, depending upon your location.

How do you fix plumbing problems?

With regular preventative maintenance you can fix many plumbing problems. Some solutions are outlined below.

Plumbing maintenance tips

As homeowners, preventative maintenance can keep you from having to pay for expensive repairs later on. Some preventative plumbing maintenance tips include:

  • Fixing leaking faucets, shower heads, and toilets: Simple repairs will prevent dripping faucets and showers and leaking toilets from causing water damage and help lower water bills. Also take care about what you’re flushing. Items other than toilet paper and waste could clog the toilet or sewer lines.
  • Unclogging drains: Use a mixture of vinegar and hot water to clear slow drains. Commercial draining agents can corrode pipes over time.
  • Checking exposed pipes for leaks: Look for any signs of leaks around exposed pipes and appliances. Look for signs of leaks such as water stains, peeling paint and mold or mildew
  • Checking water pressure: A pressure gauge can test water pressure to make sure it’s at a safe level.
  • Cleaning shower head: Cleaning sediment from your shower head will keep water flowing smoothly
  • Draining water heater and checking the burner chamber: Draining the water heater will prevent sediment build up. Make sure there are no rust flakes inside the burner chamber and that the pilot light is burning bright blue. Any yellow in the flame is a sign you need to have the jets cleaned.
  • Checking hoses for cracks and leaks: Any hoses should be checked for cracks and leaks and repaired or replaced.
Pipe wrenches are an essential tool for plumbers.

Plumbing maintenance tools list

If you are doing preventative maintenance, you may want to use some of the tools professional plumbers like Kinsey Plumbing Services use when they provide maintenance services.

Here is a list of some of tools we use:

  • Channel locks or tongue and groove pliers
  • Pipe wrench
  • Basin wrench
  • Hole saw to cut holes in wood, masonry or concrete.
  • Hose cutter to cut copper tubing
  • Rib-joint pliers
  • Drain augers or snakes
  • Metal files
  • Fire resistant cloth used as protection when soldering.

Plumbing and maintenance supply

You can find many of these tools at shops that specialize in plumbing and maintenance or at big box hardware stores.

Plumbing maintenance forms

You can keep track of your plumbing maintenance with forms that can downloaded online. Your plumbing may also use a checklist to keep track of maintenance performed.

How do you know if something is wrong with your plumbing?

Several common problems occur when there is something wrong with your plumbing.

  • Odd sounds: When you hear odd sounds like screeches from your faucets, you probably have air in your pipes and a problem with the bleed-off system.
  • Low water pressure: This could signal either a leak or a clog somewhere in your system.
  • Bad smells from drains: In your kitchen sink, this could mean food is building up and decaying in the drainpipe. A rotten-egg smell could mean you have a blocked drain vent causing sewer gas to back up in pipes. If all of your drains smell, you probably have a clogged sewer line.
  • Clogs: Any slow drainage is usually the result of clog.
  • Stains on walls or ceilings: Stains are a frequent sign you have a leak behind a wall. If the stains are on your ceiling, you may have a leak from your roof rather than a plumbing problem. A roof inspection will reveal any problems with your roof.

Cracked shingles or wood shakes could be the cause of roof leaks. In Georgetown, TX wood shakes are available from several outlets and can be installed and replaced by trusted roofing contractors.

How often should sewer lines be cleaned?

While you are tending to your regular plumbing maintenance, you will also want to make sure your sewer lines are maintained and cleaned regularly. Most sewer lines should be cleaned every 18 to 22 months. As with regular plumbing maintenance, if you are having frequent problems with your sewer lines, cleaning and checking them should be done more frequently.

Sewer line back-ups can occur for several reasons from roots damaging the pipes to sags in the lines caused by unstable soil around the pipe. One of the big enemies of sewer lines is grease. Cooking grease poured down the drain quickly solidifies and blocks pipes.

How do I stop my pipes from clogging?

Some simple measures can be taken to prevent clogs. As mentioned above, cooking grease is a major enemy for drains because it quickly solidifies and blocks the drain. Cooking grease should be disposed of in the trash. Coffee grounds also cause clogs and should be trashed or even added to your garden mulch. Hair and soap scum clogs can be prevented with screens or drain grates.

You can also prevent clogs by running hot water through your drain after each use to keep oils in food products flowing through the pipes rather than building up in them. Add a handful of baking soda washed down with hot water as a cleaning agent. Vinegar can also clear drains by pouring about 1 cup down the drain, and letting it sit for about half an hour before rinsing the drain with very hot water.   

For maintenance

Whether you need regular maintenance or a leaking pipe repaired, you can rely on Kinsey Plumbing Services for all your plumbing needs in Jarrell and Georgetown, TX and surrounding areas. For service, give us a call at (512) 930-2677.

Which Water Treatment System is the Best?

A Wall-Mounted Water Treatment System

Whole House Water Treatment Systems Offer Protection for the Entire Water Supply, Not Just the Sink.

Do you ever wonder about what’s in your water? It’s more than just hydrogen and oxygen, if that’s what you’re thinking! In truth, there are numerous microscopic materials that travel through the city water supply (and private wells). The vast majority (such as minerals) are substances you need not worry about. Others however, could have consequences for your family’s health and your home appliances.

That doesn’t mean you need to boil water for the rest of your life. It does mean that you may need to take some precautions. Today, we’ll be discussing water treatment systems for the home. We’ll tackle important questions, such as “What are the methods of water treatment?”. By the end, you will know how to identify your home’s treatment requirements, and which solution should work best for your family. Let’s dive in!

Water Treatment for Home

If you’re wondering how water treatment actually works, you’re not alone. Countless homeowners don’t fully understand the process or how they should be involved. First off, there are numerous methods of water treatment. Your home almost certainly uses one of them already: city water treatment. Municipal treatment centers take on waste water from the surrounding community and make painstaking effort to cleanse the water. To give them credit, they actually do a fantastic job.

But if that’s true, why do we need home water treatment? Not every home has access to city treated water, and those that do can still be exposed to harmful contaminants, such as bacteria, viruses, and metals. These impurities may infiltrate the water supply as it transitions between the city treatment centers and your home. Occasionally, families have even discovered deadly chemicals (such as arsenic) leaking in from nearby construction sites. 

It’s possible to have your water cleansed with a temporary chemical method. Chlorine certainly offers powerful temporary relief from potential contaminants, but even this cleaning method has its drawbacks. Instead, many homeowners prefer to use water treatment systems to safeguard their water supply. That’s what we will focus on today.

Water Treatment Tools: Filtration vs Purification

Filtration water treatment and purification are often confused. They are two distinct but commonly linked processes that provide much needed security for your water supply. Filtration utilizes a mesh (typically composed of activated carbon) that targets impurities. As water carries sediment, metals, and certain organisms through the filter, the mesh traps them and allows the cleaned water to flow through.

Purification however, uses much stronger cleansing techniques (such as distillation, de-ionization, or reverse osmosis) to neutralize and capture even more contaminants. This process breaks down harmful chemicals, kills dangerous biological hazards, and removes many microscopic impurities from your water supply. In a sense, purification is simply the next logical step beyond filtration.

A third treatment solution that may benefit your home is water softening. Softeners primarily target sediments, minerals, and metals in your home’s water supply. These systems are very helpful for families that regularly struggle with hard water content. Dense hard water content may be more than certain filtration systems are made to handle, but softeners can handle the challenge.

Benefits of Water Treatment Systems (by Type)

  • Removal of harmless, but distasteful sediments (filtration)
  • Neutralized metals, which stain clothes (filtration)
  • Captured organic material (filtration)
  • Kills biological hazards, such as bacteria and viruses (purification)
  • Neutralizes or destroys potentially harmful chemicals (purification)
  • Actively prevents hard water content and other sediment (softeners)

Picking Your System

A Roaring Waste Water Treatment Facility.

Water Treatment Facilities Neutralize the Majority of Contaminants, But Not All.

Now that you’ve got a sense for the differences between the two primary forms of home water treatment, let’s step into finding your ideal solution. Keep in mind, not everyone has the same needs when it comes to water quality. Some homeowners, such as those with well systems, will be exposed to hazards that your family may never face. In determining your home’s needs, it’s recommended that you start with a water quality test to determine what impurities are currently present in your family’s supply. The process is fast and relatively hassle free, and you’ll have a little more peace of mind afterwards.

Filtration

What is the Best Under the Sink Water Filtration System?

Should you discover that your home only needs limited protection, you’ll likely want to select an under-the-sink water filtration system. This will provide clean drinking water for your family, typically at a considerably lower price than a whole house solution. Some of the top brands include: CuZn, APEC, Woder, Aquasana, Filtrete, Doulton, and Nugen

Whether you’re considering Nugen pure water systems or another familiar name, it’s crucial that your filter’s capabilities match the requirements laid out in your water quality test. After installation, you’ll likely notice your water tastes considerably better. No more nasty sediment flavor for your family!

Purification

What is the Best Water Purification System?

  • What’s the best brand?
  • What is the best water purification method?
  • How much does it does it cost to install a water treatment system?

These are all questions that are difficult to answer definitively, because the answer relies on your particular needs. We’ll try to quickly answer them in a way that helps speed your search.

Top Brands

Some of the best reviewed brands on the purification market are Aquasana, Brita, Culligan, PUR, Crystal Clear, and Everpure.

Best Method

If you are aiming for maximum biological contaminant protection, ozone systems are very effective at targeting these organisms. Ozone systems won’t always remove chemicals, but they do transform many dangerous contaminants into harmless substances. Ozone is also very useful for removing metals. 

If you are looking for an extremely thorough purification solution, reverse osmosis may be your best choice. This type of system removes up to 99% of impurities (including harmless minerals) from your water supply. They will cost more, but they will also do more.

Cost

The bigger, the more expensive. There are whole house water treatment systems that go upwards of $4000. However, most homeowners will pay somewhere around $1700. That may be a considerable investment (and it probably won’t be covered by insurance claims), but it’s worth the additional protection for your family!

Get Your Estimate Today!

Need more information about water treatment solutions! Our team at Kinsey Plumbing Services would be happy to help. Give us a call at (512) 930-2677 to learn more.

What to Do When Your Home Floods

A Bathroom Flooding From a Terrible Leak

The Moment You Realize a Room is Flooding, Shut Off the Water Supply as Quickly as Possible!

One rainy day, Kenyan nation Mheshimiwa Jaguar learned the hard way how expensive water damage can be. Torrential rain swept through the musician’s beautiful his home, ruining costly electronic equipment. Jaguar’s flooded house reminds us all that whether your home is impacted by torrential rain or a damaged plumbing system, the consequences can be devastating.

How do you treat a flooded house? Today, we’ll be discussing steps you can take when your house begins to flood, then breaking down the post-flooding process. While external issues (such as siding repair) are important, our talk will focus on internal plumbing issues. After reading through this short guide, you should know how to minimize damage to your home in the event of a flood.

What to Do if Your House Starts Flooding

Unless there is immediate risk to family members or pets, your first step in the event of a plumbing flood should be to shut off the water. Now there are certain instances where the flooding is a result of sewer backflow. In these cases, only a preventative sewer backflow valve can prevent flooding. We’ll talk more about that sort of emergency later. If you can do so safely, shut off the electricity. 

After shutting off your water supply, make a call out to your local plumber. Water damage gets worse over time, so call as quickly as possible. Even if you have to pay extra for after hours emergency plumbing repair, the additional fee is far less costly than advanced water damage and mold growth. Delaying repairs for a prolonged time could lead to thousands of dollars in restoration costs.

Next, call your insurance provider and inform them about the incident. They may want to send an adjuster to survey the damage. Make sure to take pictures of the damage before you start cleaning up. We’ll discuss this problem in a bit.

Review of Flooding Response Steps

  • Evacuate People and Pets
  • Turn Off the Water ASAP
  • Shut Off the Electricity (if safe) or Call Electrician
  • Call the Plumber
  • Call Home Insurance
  • Take Pictures
  • Start Cleaning (if insurance allows)

Preventing Mold Problems

Extensive Mold Growth in Wall

Mold is More Than an Eyesore. It Can Also Produce Unpleasant Physical Reactions.

How long does it take for mold to form after a flood? This is a common question our professionals hear on flooding visits. The widely accepted range for start growing is 1-2 days. That doesn’t mean it’s visible quite yet. According to restoration experts, “…spores begin to colonize in 3 to 12 days and become visible in about 18-21 days.” That means mold has started reproducing long before homeowners ever become aware of it.

Mold spores can cause unpleasant physical consequences in people, especially those with mold allergies. General symptoms of mold exposure include (but are not limited to): lung irritation, sneezing, coughing, and a scratchy throat. Those with an allergy can have more serious symptoms. Depending on the severity of the flooding incident, you’ll likely need to contact a home restoration company to dry out your home.

Common Problems That Lead to Flooding

There are countless plumbing issues that can result in flooding. All it takes is a particularly rainy day, a clogged drain, or a heavily corroded pipe. Below are just some of the problems we’ve encountered.

  • “The water heater flooded my house!”
  • The house flooded by burst pipe.
  • Tree roots clogged the sewer line and flooded the bathroom
  • A kid flushed a toy and backflow flooded the bathroom.
  • The sink pipe ruptured and started flooding the kitchen.
  • A pipe ruptured behind the wall.

It’s the hard to reach areas that often go unnoticed, until the flooding bursts through the walls. Remember, the best response is to shut off the water as quickly as possible. After that, you can work on cleaning up the mess.

Get the Water From Your House, Out of the House

Woman Cleaning Up Minor Flooding From a Wall Leak

Before You Start Cleaning Up Your Flooded House, Take Pictures for Insurance Purposes.

Repairing your flooded home gets harder the longer you have to wait. If the flooding is extensive, you can pump it out using equipment from your local Home Depot or Lowes. Restoration services can also perform the water removal for you to speed the process. You’ll need to start drying the house soon after. Once you’ve made sure there isn’t any mold growth, you can open windows and use fans to start ventilating the house. FEMA has a handy short guide on venting the humidity and mold prevention. They do however, recommend consulting a professional if the growth is too extensive. You can purchase a dehumidifier to aid your drying process. The affected areas will then need to be disinfected to prevent future mold growth.

Schedule Your Emergency Service Today!

If your home has been affected by plumbing-related flooding, our Kinsey Plumbing Services team would love to provide some relief. Call our team at (512) 930-2677 and ask about our emergency plumbing repair in Jarrell and Georgetown, TX! We’ve helped many a flooded house over the years, and our professionals can help make the process much less stressful.

Should You Get a Gas Water Heater?

pilot light in a gas water heater

The Flame of A Gas Water Heater Warms Water At Twice the Speed of An Electric Water Heater

A lot of homes in America have a tankless or tank water heater that uses electricity or gas as the energy source to heat the water. While electricity is already installed in the majority of people’s homes due to internet and cable needs, most homeowners just opt for an electric water heater. But they could be saving so much money and getting hotter water so much quicker with a gas water heater! Propane and gas water heaters run on natural gas or propane. In order to transfer the gas safely to the water heaters, gas lines need to be installed in homes. If you have a propane water heater, propane tank installation may be required as well. While this raises the price of installation, average energy savings thanks to the gas water heater alone are around $100. Over its lifespan, the gas water heater pays for itself whereas the electric water heater ends up costing you more in repair fees and energy bill increases. For gas water heater installation or repair in Jarrell and Georgetown, TX, call Kinsey Plumbing Services at (512) 930-2677 today.

Electric Vs Gas Water Heaters

Electric

  • Has a lifespan of 13 years.
  • Does not require additional installation or wiring.
  • More convenient.
  • Easier repairs.
  • If there is no electricity, water cannot be heated.

Gas

  • Has a lifespan of 20 years.
  • Can require additional gas line installation, raising the cost.
  • Dangerous and explosive if mishandled.
  • Heats water quicker.
  • Gas water heaters work in power outages and storms to provide hot water in emergencies.

Before Things Escalate – How to Tackle Slab Leak Damage

Crack in a Concrete Path

Slab Leaks are a Serious Problem for Your Foundation. A Small Leak Can Have Big Long-Term Consequences.

While not every homeowner has had the horror of personally handling a slab leak, most know enough to say “it’s really bad!” Indeed, these leaks cost many Americans hundreds (if not thousands) of dollars in water waste, plus a great deal of money for slab leak repair. Today, we’ll talk about the primary causes of slab leaks and why they can be so dangerous for homeowners.

What Causes a Slab Leak?

A slab leak occurs when a pipe that fits through the foundation slab beneath your home fails (for whatever reason) and begins to leak water or sewage. There are a few primary forces that can cause the pipe to fail, including:

  • Long-Term Corrosion
  • Internal Pressure (from blockage)
  • External Pressure (from shifting ground)

Unfortunately, there’s very little you can do to prevent long-term corrosion, except to choose highly durable piping. When it comes to internal pressure, homeowners have more options. Regular inspections, occasional water treatment (or a water softener installation), and paying close attention to what you flush down the toilet will help you protect your slab pipes.

External pressure is a long term war. A cracked driveway may be the first sign of shifted ground. Before you get started on driveway repair, make sure you check your plumbing for potential leaks.

Can a Slab Leak Cause Foundation Problems?

The short answer is “yes. When water from your pipes seeps into cracked concrete, the material is slowly worn away and destabilized. This process may last for years before the damage becomes noticeable, but the effects could be catastrophic for your home. If you notice water coming up through cracks in the pavement, against the exterior walls, or even beneath the internal flooring, contact your local plumber as soon as possible.

Schedule Your Slab Leak Repairs Today!

You’ll want a plumber that has experience with slab leak repair. If you suspect your home may have a plumbing leak, let’s get it taken care of as soon as possible! You can call our team at (512) 930-2677 for assistance.

How Can We Save Energy in Our Homes?

Energy Efficiency

Surprised by Your Energy Bill? Learn How You Can Make Your Home More Energy Efficient!

Saving money and fighting energy waste is an ongoing battle that every homeowner faces. The good news is, there are many opportunities for you to conserve energy, so it’s easy to get started! Here are some valuable tips you can use to get the ball rolling on your quest for energy efficiency.

Ways to Improve Your Home Energy Efficiency

The easiest method to find ways to save is determining what parts of your home consume the most electricity. Together, your water heater, clothes washer, and dishwasher represent several hundreds of dollars in electricity and gas expenses. If you can replace these with more energy efficient models, you could see hundreds of dollars in savings on an annual basis.

You don’t always have to spend big to save big however! You don’t have to kick off your energy goals by investing the latest tankless electric water heater. Even little appliance upgrades, such as a low-flow shower head, can help you cut down on hot water heating costs.

Combating Energy Losses

Half the battle of energy efficiency is fighting against energy waste. While much of this waste is generated by losses in your HVAC system and roofing insulation, there are other less obvious culprits. “Always on” devices for instance, such as electronics, your furnace, and plugged in cooking appliances. These consume energy even when they aren’t being used; try to unplug appliances and electronics that aren’t in use, or search

Your water usage too has a big impact on your home’s energy efficiency. Remember: if it requires hot water, it uses electricity (and/or gas). Using cold water to wash your clothes can save considerable amounts of money on laundry day. Taking a hot shower may use less energy than taking a bath, but cool showers are even more efficient. Even reusing lightly used drinking glasses can help you reduce the number of dishwasher cycles, which require hot water.

Schedule Your Plumbing Inspection

We wish you good luck in your quest for enhanced energy efficiency in your home. We’d love to do our part by helping you maintain your plumbing system and cut down on water waste! If you’d like more information about saving energy, or if you’d like to schedule an inspection, feel free to contact our team at (512) 930-2677.

Tankless Vs. Tank Water Heater

The 10 year warranty on your water heater is coming up and it is time to replace it. Should you stick with the same water heater type you have or invest in something new? Here, we weigh the pros and cons of the two most popular water heater choices: a tankless and tank water heater.

Tank Water Heater

We Install and Repair Both Tankless and Tank Water Heaters

The original water heater model, it has been around since the 1800s. The tank water heater is usually found in unused areas like garages, basements, laundry rooms, or storage closets. It is large and can be unsightly to some. The tank water heater can store dozens of gallons of water for indefinite periods of time, which is great if you ever have an emergency situation. One heating coil at the bottom of the tank constantly keeps the stagnant water warm until it is ready for use, meaning it is always hot. Because the water just sits there, sediment deposits from the minerals in the water eventually form on the tank and clog the machine, requiring repairs.

Tankless Water Heater

Tankless water heaters are a slightly newer invention. Much tinier, they appear the be the size and shape of a suitcase, or even smaller, sometimes the size of thermostats. Tankless water heaters don’t store water, and only heat water when the hot water tap is turned on, saving water and energy. Tankless water heaters are beneficial for small households or those without lots of space. Because they don’t store water, tankless water heaters take longer to produce hot water, so they are not recommended for large families or people who want instant hot water.

Can’t decide which water heater is best for you? Call Kinsey Plumbing Services at (512) 930-2677 and we can help you choose if a tankless or tank water heater would be best for your home in Jarrell and Georgetown, TX.

The Dangers of Small Water Leaks

When your home has a small water leak, you may be tempted to put off repairs. However, these water leaks can lead to multiple problems that go unnoticed until it’s too late. It’s always best to repair any size water leak as soon as it’s found to prevent big problems with hefty price tags.

Prevent Water Leak Damage in Your Home.

Even the Smallest Water Leaks Can Cause Extensive Damage to Your Home.

Insurance Denial

While some water damage is covered by a typical insurance policy, gradual damage is never covered. Therefore, if your small leak causes damages over time, they will not be covered by your policy. It’s always best to report any water damages as soon as they occur for the best possibility of coverage.

Mold Growth

As water and moisture sits, it begins to create the perfect environment for mold growth. Many kinds of mold are simply a nuisance, but there are a few that can cause major health problems. Mold removal is a costly and lengthy project that can be avoided with timely repair of your water leaks.

Structural and Cosmetic Damage

When your home has an unrepaired water leak, you may find yourself facing problems like rotted cabinets or flooring, weakened structural boards and braces, and peeling paint or paper. These problems can be wide-ranging and can require a simple coat of paint or can be extensive and need rebuilding or replacement.

While water leaks in your home are never any fun, they are much less costly and time-consuming than further problems that can stem from a continued leak. When you think you have a water leak, call the Kinsey Plumbing Services experts right away to provide realistic options for every budget. Call us today at (512) 930-2677 to schedule your appointment.

The Benefits of Getting a Water Softener Installation

If you have hard water in your home, there is a way to stop it once and for all. Getting a water softener installation for your home’s plumbing can make a huge device in your day to day life. There are many benefits that are sure to satisfy homeowners who have been dealing with hard water for too long. Below is a list of reasons why you should consider a water softener installation.

Extends a Plumbing Appliance Lifespan

The Benefits of Getting a Water Softener Installation

Have You Appliance, Systems, and Pipes Work Effectively with a Water Softener Installation.

Hard water tends to have a lot of minerals, which can build up in appliances like dishwashers, washing machines, and water heaters. Due to the build of these minerals, it can cause the efficiency and lifespan of these appliances to decrease. By installing a whole water softener system, you can prevent whole appliance replacements due to damages from hard water.

Plumbing Systems and Pipes Are Cleaner

Because of the minerals and deposits that are found in hard water, they tend to clog up pipes and plumbing systems. Not only that, these deposits and minerals can also corrode the pipes, which makes a replacement service inevitable. Water softeners can reduce this risk and keep your plumbing systems and pipes safe from mineral and deposits found in hard water.

Better Energy Costs

With a water softener installation, you are able to save more money on energy bills. The minerals and deposits that build up in our pipes, systems, and appliances, can affect the way they perform, causing them to work harder than they should. A water softener enables these plumbing systems, pipes, and appliances to work more efficiently.

If you are interested in an installation or repairs for a water softener in Jarrell and Georgetown, TX, call Kinsey Plumbing Services at (512) 930-2677 to set up an appointment.